Navigating To A Waypoint; Editing A Waypoint; Deleting A Waypoint; Waypoint Averaging - Garmin GRN-010-02088-01 Owner's Manual

Navigating to a Waypoint

1 Select FIND > Waypoints.
2 Select a waypoint.
3 Select Go.
By default, your route to the waypoint appears as a straight, colored line on the map.

Editing a Waypoint

1 Select Waypoint Manager.
2 Select a waypoint.
3 Select an item to edit, such as the name.
4 Enter the new information, and select Done.

Deleting a Waypoint

1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Delete.

Waypoint Averaging

You can refine a waypoint location for more accuracy. When averaging, the device takes several readings at the
same location and uses the average value to provide more accuracy.
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Average Location.
4 Move to the waypoint location.
5 Select Start.
6 Follow the on-screen instructions.
7 When the confidence status bar reaches 100%, select Save.
For best results, collect four to eight samples for the waypoint, waiting at least 90 minutes between samples.

Projecting a Waypoint

You can create a new location by projecting the distance and bearing from a marked location to a new location.
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Project Waypoint.
4 Enter the bearing, and select Done.
5 Select a unit of measure.
6 Enter the distance, and select Done.
7 Select Save.

Moving a Waypoint on the Map

1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Move Waypoint.
4 Select a location on the map.
5 Select Move.
18 Navigation