Garmin GTN 625 Pilot's Manual page 220

9.3.3
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
9.3.4
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Selected
Altitude Filter
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
9-6
Displaying Traffic on the Traffic Page
1. From the Home page, touch the Traffic key.
2. Confirm TIS is in Operating Mode.
3. Touch the Traffic Status key to toggle between Operate and
Standby mode.
Altitude Display
1. While viewing the Traffic page, touch the Operate key to begin
displaying traffic. "Operate" is displayed in the Traffic Status
field.
2. The Altitude Filter limits the traffic displayed to the Below,
Normal, Above or Unrestricted altitude block as listed in the
"Displayed Traffic Range" table. The filter altitudes are relative
to ownship altitude. Touch the Altitude Filter key to change
the altitude filter value. Select the desired altitude filter by
touching the BELOW, NORMAL, ABOVE, or UNRESTRICTED
keys. The selection is displayed in the Altitude mode field.
Figure 9-6 Traffic Altitude Filter Page
Altitude Mode
Below
Normal
Above
Unrestricted
Table 9-2 Displayed Traffic Range
Garmin GTN 625/635/650 Pilot's Guide
Slider Indicates
More Selections
Are Available
Displayed Traffic Range
-9900 ft to 2700 ft
-2700 ft to 2700 ft
-2700 ft to 9900 ft
All Traffic Shown
190-01004-03 Rev. K