Menu itemAudio
The following information is displayed in the Audio menu item.
Radio
▶
Currently playing station (name/frequency).
▶
The selected frequency range (e.g. FM) optionally with the number of the
station button (e.g. FM3), if the station is stored in the memory list.
▶
List of available stations (if more than 5 stations can be received).
TP traffic announcements.
▶
Media
▶
Name of the track being played, if necessary, further information regarding
title (e.g. artist, album name), if this information is stored as a so called ID3
tag on the audio source.
Menu itemTelephone
The call list with the following symbols is displayed in the Telephone menu item.
Incoming call
Outgoing call
Missed call
Symbols in the display
Charge status of the telephone battery
Signal strength
1)
A telephone is connected to the unit
Missed calls (if there are several missed calls, the number of calls is shown
next to the symbol)
Switch-off microphone
Menu itemAssist systems
The following systems are activated/deactivated in the Assist systems menu
item.
▶
Front Assist
Lane Assist
▶
1)
This function is only supported by some mobile phones.
48
Operation
1)
Rear Traffic Alert
▶
Assist system for blind spot monitoring
▶
Menu itemLap timer (Stop watch)
The Lap timer function offers the possibility of calculating the lap time, for ex-
ample when driving on a race course. The measured time is shown in the dis-
play.
The calculated times are displayed in minutes, seconds and tenths of seconds.
The following functions are available.
Start time - start the timing manually or continue the interrupted measure-
■
ment
Since start - Start the timer automatically upon start-up
■
Statistics - Evaluate and reset the measured times
■
Time measurement
▶
To start the measurement manually, choose the menu itemLap timer - start .
▶
To start the measurement automatically, choose the menu item Lap timer -
Since Start . Timing will begin automatically when starting up.
To start the measurement of the next lap during time measurement, choose
▶
the menu item new lap.
During timing, information about the fastest and the last lap time are also
shown in the display.
Measure split time
▶
During the timing, select the menu item Split time. The split time data is dis-
played for about 5 seconds in the display.
The split time can be measured repeatedly during a round.
Stop measurement
▶
During the timing, press the menu item Stop.
The time measurement is stopped, the following functions are now available.
Continue - Continue measurement of the current lap time
■
New lap - Start measurement of the next lap time.
■
Abort lap - Cancel the timer (the aborted lap time is not stored)
■
Hang up - End timing (the aborted lap time is stored)
■