Table of Contents
Advertisement
Fig. 130 Correctly secure net partition behind the front seats in the
pulled-out state
The net partition can either be pulled out and secured from behind the rear
seats or behind the front seats.
Pull out and secure the net partition behind the rear seats
›
Fold out part
of the roll-up luggage compartment cover in the direction of
A
arrow
» Fig.
129.
›
Pull out the net partition at the crossbar
tacles
» Fig.
130.
D
›
On the other side, press on the crossbar in the direction of the arrow and
hook it into the appropriate receptacle
›
Make sure that the crossbar is firmly seated in the two mountings
›
Fold back part
of the roll-up luggage compartment cover in the opposite
A
direction of the arrow
» Fig.
129.
Using the net partition behind the rear seats
›
Fold out part
of the roll-up luggage compartment cover in the direction of
A
arrow
» Fig.
129.
›
Press on the crossbar and remove it from the receptacles
on one side, then on the other side.
›
The crossbar
Hold in such a way that the net partition can slowly roll up
C
without being damaged.
›
Fold back part
of the roll-up luggage compartment cover in the opposite
A
direction of the arrow
» Fig.
129.
and hook into one of the recep-
C
.
D
.
D
» Fig.
130, first
D
Pull out and secure the net partition behind the front seats
The process is analogous to that for behind the rear seats. Before pulling out
the net partition, the rear seat backs are to be folded forwards. After rolling up
the net partition into the housing, the rear seat backs are folded back
» page
79.
CAUTION
If the net partition blocks when pulling it out, push the release lever
direction of the arrow
» Fig.
129.
Removing and installing the net partition housing
›
To remove, fold forwarded the rear seat backrests and open the rear right
door.
›
Push the housing
in the direction of the arrow
A
mountings in the direction of the arrow
›
To install, insert the recesses on the housing
rear seat backrests and push the housing against the arrow
stop.
›
Fold the rear seat backrests to their original position.
in the
B
Fig. 131
Removing the net partition
housing
and remove it from the
1
» Fig.
131.
2
into the mountings on the
A
up to the
1
105
Transport of cargo
- Quick Links:
- Engine Oil
Hide quick links:
Advertisement
Table of Contents
