Skoda A7 Octavia Owner's Manual page 132

Voice control settings
›
Press the button, then tap on the function surface  → Voice control.

Example commands (infotainment system) - Turn on/off display of the menu con-
■
taining basic voice commands when voice control is activated
Voice control session start tone - Switch on/off the audible signal when turning on
■
the voice control
Voice control session end tone - Switch on/off the audible signal when voice con-
■
trol ends
Input tone in voice dialogue - Switch on/off the audible signal for the voice input
■
End tone in voice dialogue - Switch on/off the audible signal for the voice input
■
Safe removal of the external device
›
Press the button, then tap on the function surface  → Remove safely and

select the external device to be removed.
Reset to factory settings
›
Press the button, then tap on the function surface  → Factory settings.

In this menu, all or only chosen settings can be restored.
®
Bluetooth Settings
›
Press the button, then tap on the function surface  → Bluetooth.

Bluetooth - Switch on/off Bluetooth
■
Visibility: - Switch on/off the visibility of the Bluetooth
■
devices
Name: - Changing the name of the Bluetooth
■
Paired devices - Display the list of coupled Bluetooth
■
Find devices - Searches for available Bluetooth
■
Bluetooth audio (A2DP/AVRCP) - Turn on/off the ability to connect a Bluetooth
■
audio device (e.g. MP3 player, tablet etc...)
Wireless settings
Applies to Infotainment Columbus, Amundsen.
›
Press the button, then tap on the function surface  → WLAN.

130
Infotainment
®
function
®
device for Bluetooth
®
unit
®
devices
®
devices
WLAN - List of available hotspots of external devices
■
WLAN - Turn on / off Infotainment wireless
■
WPS quick connection (WPS button) - Establishing a secure connection to the
■
hotspot of the external device using WPS (applies to Infotainment Amund-
sen)
Manual settings - Setting the parameters for search and connection to the
■
hotspot of the external device
Network name - Enter the Hotspot name
■
Network key - Setting the access password
■
Security level: - Sets the security
■
WPA2 - WPA2 security
■
No security level - No security (without required entry of the access pass-
■
word)
Connect - Connection establishment
■
Search - Search / Restore the list of available hotspots
■
Mobile hotspot - Setting Infotainment hotspot (in the function surface the sym-
■
bol  displayed with the number of connected external devices)
Mobile hotspot - Switching on / off Infotainment hotspot
■
WPS quick connection (WPS button) - Establishing a secure connection to the In-
■
fotainment hotspot via WPS (applies to Amundsen)
Hotspot (WLAN) settings - Setting the parameters for the connection to Info-
■
tainment hotspot
■ Security level: - Setting the connection security
WPA2 - WPA2 security
■
No security level - No security (without required entry of the access pass-
■
word)
Network key - Entering the access password
■
®
SSID: ... - Name of the Infotainment hotspot
■
Do not send network name (SSID) -Turn Infotainment hotspot visibility on/off
■
■ Store - Storage of Infotainment hotspot parameters
Settings
®
Applies to the infotainment Columbus with seated in the external module SIM
card as well as for the Infotainment Amundsen with the connected Carstick-
Device.
›
Press the button, then tap on the function surface  → Network.

