›
Fit the connector.
Refit the headlight and grille
›
Insert the fog light opposite to the direction of arrow
posite to the direction of arrow
›
Insert the guard and push it gently until it locks into place.
Change bulb for fog lights switch - Variant 2
Fig. 352 Remove the fog lamp / bulb change - variant 2
Read and observe
and
Remove the cover and headlight
›
Insert the clamps for removing the full wheel trims into opening
» Fig.
352.
›
Remove the cover by pulling the hook in the direction of arrow
›
Unscrew the screws
with the screwdriver from the tool kit.
B
›
Raise the headlights in the direction of arrow
direction of arrow
.
3
Replacing the light bulb
›
Press the latch on the connector in the direction of arrow
» Fig.
351, push op-
4
and bolt into place.
3
on page 303 first.
and remove carefully in the
2
.
4
›
Remove the key in the direction of the arrow
›
Turn the socket with the bulb to the stop in the direction of the arrow
›
Remove the socket with the bulb in the direction of arrow
›
Insert the new bulb into the headlight and turn counter to the direction of
arrow
as far as the stop.
6
›
Fit the connector.
Refit the headlight and cover
›
Replace the fog light by inserting it in the opposite direction of the arrow
» Fig. 352
and tighten.
›
Insert the guard and push it gently until it locks into place.
Removing/installing tail light
A
Fig. 353 Removing lamp
.
1
.
5
.
6
.
7
3
305
Fuses and light bulbs