Skoda A7 Octavia Owner's Manual page 296

Remove/insert cap
›
To remove, press on the cap in the direction of the arrow
in the direction of arrow » Fig.
2
›
To insert, insert the cap in arrow range
edge of the cap. The cap must engage firmly.
Removing/installing the towing eye
›
To install, screw in the towing eye by hand in the direction of arrow
» Fig. 329 until the stop» .
For tightening purposes, we recommend, for example, using the wheel wrench,
towing eye from another vehicle or a similar object that can be pushed
through the eye.
›
To remove, unscrew the towing against the direction of arrow
WARNING
The towing eye must always be tightened, otherwise the towing eye may
break during the towing.
Towing eye rear
Fig. 330 Remove cap / install towing eye - Variant 1
294
Do-it-yourself
and remove this
1
329.
and then press on the opposite
1
.
3
3
Fig. 331 Remove cap / install towing eye - Variant 2
Remove/insert cap
›
To remove, press on the cap in the direction of the arrow
in the direction of arrow
›
To insert, insert the cap in arrow range
edge of the cap. The cap must engage firmly.
Removing/installing the towing eye
›
To install, screw in the towing eye by hand in the direction of the arrow
» Fig. 330» Fig.
3
For tightening purposes, we recommend, for example, using the wheel wrench,
towing eye from another vehicle or a similar object that can be pushed
through the eye.
›
To remove, unscrew the towing against the direction of arrow
Vehicles with a tow hitch
For vehicles with factory-fitted towing device, at the back there is no mount
for a screw-in towing eye. Use the detachable ball rod for towing
Hitch.
WARNING
The towing eye must always be tightened, otherwise the towing eye may
break during the towing.
» Fig. 330.
2
and then press on the opposite
1
331until it clicks into place» .
and remove this
1
.
3
» page 250,