Table of Contents
Advertisement
Touchscreen tone - Switch on/off audible tone when touching the screen
■
No navigation sound during call - Switching on / off the nav. announcements dur-
■
ing a telephone call (not applicable to Infotainment Bolero)
Display settings
›
Press the
button, then tap on the function surface → Screen.
Switch off screen (in 10 seconds) - Enable / disable the automatic power off func-
■
tion
■
Brightness: - Adjusts the brightness of the screen
Touchscreen tone - Switch on/off audible tone when touching the screen
■
Menu button tone - Turn on / off the acoustic signal by pressing a button next
■
to the screen
Animation when finger near screen - Turn the proximity sensors on/off (When the
■
function is on, e.g.Navigation will be shown in the main menu when moving a
finger towards the bottom bar with the function surfaces on the screen)
■
Show clock in standby mode - Time and date displayed on the screen when the
ignition is switched on and Infotainment is switched off
Time and date settings
›
Press the
button, then tap on the function surface → Time and date.
Clock time source: - Setting the time source: Manual / GPS (applies to Infotain-
■
ment Columbus, Amundsen)
Time: - Time settings
■
Summer time - Switches the summer time on/off
■
Automatic summertime - Turn on / off the automatic switch to daylight saving
■
time
Time zone: - Choice of time zone
■
Time format: - Specify the time format
■
Date: - Date settings
■
Date format: - Setting the date format
■
Setting the Infotainment language
›
Press the
button, then tap on the function surface → Language.
›
Select the Infotainment language.
In some languages, after selecting the function surfaceFemale and Male are dis-
played for the choice of voice prompts for Infotainment.
Note
When a language is selected which does not support voice control, Infotain-
■
ment will indicate this with a message on the screen.
The messages are generated by Infotainment. Flawless clarity (e.g. road or
■
city name) cannot always be guaranteed.
Additional keypad language settings
›
Press the
button, then tap on the function surface → Additional keypad
languages.
In this menu, a keyboard language set can be added to allow the entering of
characters other than those in the currently selected language (function sur-
face or ).
Unit settings
›
Press the
button, then tap on the function surface → Units.
Distance: - Distance units
■
Speed: - Speed units
■
Temperature: - Temperature units
■
Volume: - Volume units
■
■
Consumption: - Consumption units
CNG consump.: - CNG consumption units
■
Pressure: - Pressure units for tire pressure
■
Setting data transfer
An active data transfer allows data transfer between Infotainment and the ex-
ternal device (e.g. ŠKODA One App application) or the operation of some Info-
tainment functions using the application of the external device (e.g. ŠKODA
Media Command).
›
Press the
button, then tap on the function surface → Mobile device data
transfer.
Activate data transfer for ŠKODA apps- Turning data transfer on and off
■
Use apps to operate:: - Setting Infotainment operation via the applications of the
■
external device (applies to Infotainment Columbus, Amundsen)
Deactivate - Deactivation of Infotainment operation via an external device
■
Confirm - Infotainment operation with required confirmation
■
Allow - Infotainment operation without required confirmation
■
Infotainment settings - Columbus, Amundsen, Bolero
129
- Quick Links:
- Engine Oil
Hide quick links:
Advertisement
Table of Contents
