Infotainment operation
Infotainment operation
Operation principles and screen areas
Fig. 153 Screen area / screen display
Description of the display
» Fig. 153
Status line with time and outdoor temperature data and other information
A
Information and the operation of the current menu
B
Function surfaces of the current menu
C
Identification of the current menu
D
Return to the higher-level menu
E
Sliding regulator
F
Menu item with "Checkbox"
G
▶
- Function is switched on
- Function is switched off
▶
Open a sub menu of the menu item with the "pop-up window"
H
Functional surfaces
The screen areas which confirm a function or a menu are called "function sur-
faces".
White text - the surface is active and thus selectable
▶
▶
Grey text - the surface is inactive and therefore not selectable
▶
Green frame - currently selected surface
Selecting menu/menu item/function
Drag your finger over the screen in the required direction.
▶
▶
By moving your finger over the slider
▶
Turning the knob (not applicable to Infotainment Columbus).
Confirming menu/menu item/function
By tapping on the function surface.
▶
By pressing the knob (not applicable to Infotainment Columbus).
▶
Returning to the higher-level menu
▶
By tapping on the function surface .
▶
By tapping on the screen outside of the "pop-up window".
▶
By pressing the corresponding button next to the screen (e.g. in the Media
menu, by pressing the
button) (not applicable to Infotainment Colum-
bus).
Selecting the menu item/function value
▶
- Selected menu item / function value
▶
- Deselected menu item / function value
Set value
By tapping on the function surface or the bottom of the screen.
▶
By touching or moving your finger over the scale.
▶
▶
Turning the knob (not applicable to Infotainment Columbus).
Note
Depending on the equipment fitted, Infotainment can be operated using the
buttons on the right-hand operating lever or on the multifunction steering
wheel. Further information
» page
44.
Infotainment operation
121