Skoda A7 Octavia Owner's Manual page 197

Detail of the traffic report
Fig. 225 Details of the traffic report: TMC source/online source
The display of traffic report details is dependent on whether the respective
traffic report is based on the TMC source
» Fig. 225 - .
›
To display this, select the desired traffic report from the list of traffic re-
ports.
›
Or Tip on the traffic obstruction symbol in the map.
Depending on the context, the following information and functional surfaces
are displayed » Fig. 225.
Map of the affected location
A
Description of the traffic obstruction
B
Reception timing and information relating to the traffic report provider
C
(is ŠKODA Connect the provider, it is an online traffic report)
Symbol of the traffic obstruction
D
Length of the traffic obstruction
E
Dynamic route
Infotainment allows an evaluation of the traffic reports received during the
route guidance. In fulfilling the following conditions, a bypass route is calcula-
ted, and the appropriate announcement is issued.
The dynamic route function is turned on.

The traffic congestion included in the traffic information is on the route.

The traffic obstruction will be evaluated by Infotainment as of great im-

portance.
» Fig. 225 -  or the online source
›
To switch on/offin the main menu Navigation, tap on the function surface
 → Route options → Dynamic route.
enter / remove traffic conditions on your route manually
If a traffic obstruction is detected during route guidance (e.g. traffic jam), this
traffic obstruction be manually entered into the route.
After entering, Infotainment calculates and provides an alternative route.
Enter traffic obstruction
›
In the Navigation main menu, tap on function surface  → Congestion ahead.
›
Adjust the length of the traffic obstruction.
The traffic obstruction will be displayed in red in the map to the right along the
route.
Remove traffic obstruction
The traffic obstruction is removed from the route after completion of the
route guidance or can manually be removed as follows.
›
In the Navigation main menu, tap on function surface  → Cancel "congest.
ahead".
195
Navigation