Table of Contents
Advertisement
Printing Using the Computer
WPS (Wi-Fi Protected Setup™)
If your wireless access point/router supports WPS, you can configure settings and connections wirelessly.
a
First, confirm that your wireless access point/router has the WPS symbol.
b
Select [Settings] in the Home screen using the , ,
key.
c
Select [WLAN] using the
d
Select [Infrastructure Mode] using the
e
Select [Network Setting] using the
f
Place your machine within the range of your wireless access point/router. The range may differ
depending on your environment. See the instructions provided with your wireless access point/router.
g
Select [Button Push] using the
h
Press the OK or Enter key for a message that appears before the [Start WPS on Your Wireless
Access Point].
The [Start WPS on Your Wireless Access Point] message appears.
i
Press the WPS button on your wireless access point/router, and then press the OK or Enter key on
your machine.
Note
To return to the previous step, press the Esc key.
j
[Connecting...] appears for a while, and then [Connected!] appears.
k
Press the OK or Enter key.
The screen returns to the [Settings] menu screen.
Depending on the strength of the wireless signal, the wireless connection indicator may show one of
the following symbols:
Note
• If you start the setup wizard for the Infrastructure mode or select the network settings for the Direct mode
when the wireless function of the machine is turned off, [Turning on Wi-Fi Radio] appears and the
wireless function turns itself on automatically (or after the OK key is pressed). It is no longer necessary to
turn the Infrastructure mode or Direct mode on manually.
• Your machine will try to connect using WPS for two minutes. If the
during that time, the machine will continue trying to connect for an additional two minutes.
• If your machine could not connect to the network, a message indicating that the connection failed appears.
or
key, and then press the OK or Enter key.
or
or
key, and then press the OK or Enter key.
or
key, and then press the OK or Enter key.
or
key, and then press the OK or Enter
key, and then press the OK or Enter key.
(Wi-Fi) button is pressed and held
4
66
Advertisement
Table of Contents
