Table of Contents
Advertisement
Printing a Label Using the P-touch Labelling Machine Keyboard
Using Block Layouts
You can use pre-installed block layouts to create labels by just entering the text or barcodes. Selectable
"Block Layouts" are listed in the Appendix. (See Block Layout on page 234.)
a
Select [Block Layouts] in the Home screen using the
Enter key.
b
Select the tape width using the
c
Select a block layout using the
d
Enter text or a barcode for each text field if needed, and then press the OK or Enter key.
e
When finished, press the OK or Enter key.
To print the label, select [Print] using the
Note
• For more information about barcodes, see Creating a Barcode Label on page 26.
• You can use the serialise settings with the entered text and barcodes. To specify the serialise settings,
see Entering a Serialised Label on page 20. (The advanced serialize mode cannot be used.)
• To print the label, see Printing a Label on page 40.
• To preview the label before printing, select [Preview] using the
Enter key. For more information about the preview screen, see Label Preview on page 44.
• To save the label, see Storing a Label in the File Memory on page 47.
Cable Label Type
You can create labels for cables, patch panels, and other equipment when performing electrical work by
selecting the type of label and setting the necessary items.
a
Select [Cable Label] in the Home screen using the
Enter key.
b
Select a label type using the
The available cable label types are as follows:
Note
Factory settings are shown in bold.
or
key, and then press the OK or Enter key.
or
key, and then press the OK or Enter key.
or
key, and then press the OK or Enter key.
or
key, and then press the OK or Enter key.
,
,
or
key, and then press the OK or
or
key, and then press the OK or
,
,
or
key, and then press the OK or
2
2
2
34
Advertisement
Table of Contents
