Entering A Serialised Label - Brother D800W User Manual

Printing a Label Using the P-touch Labelling Machine Keyboard
d
In the label creation screen, enter the symbol you want to add to your history by pressing the Symbol
key, selecting a symbol category using the
using the , ,
e
Press the Symbol key.
[History] appears, including the symbol entered in step d.
Note
• Up to 30 symbols can be added to [History]. The oldest symbol will be deleted from the category when
the symbols added to [History] exceed 30 symbols.
• To stop using [Symbol History], follow steps a and b above, and then select [Off] in the [Symbol
History] screen in step c.

Entering a Serialised Label

Numerically serialised labels can be created. You can set the increment and count for the series. In the
serialize mode, you can create a series of labels by incrementing one numeric character in the pattern. In the
advanced serialize mode, you can select between Simultaneous or Group. Simultaneous mode creates a
series of labels by incrementing two different numbers at the same time. Group mode creates a series of
labels by allowing you to select two sequences in the pattern and increment them consecutively.
Serialize Mode
a
Enter the text except the text that you want to serialise.
Example: To create labels 1A-A01, 1A-A02, 1A-A03, and 1A-A04, enter only "1A-A0".
or key, and then pressing the OK or Enter key.
or key, pressing the OK or Enter key, selecting a symbol
2
2
2
20