Table of Contents
Advertisement
Changing the P-touch Labelling Machine Settings
4 Current Settings
Retrieves the settings from the currently connected machine and displays them in the dialog box. Settings
will also be retrieved for parameters on tabs with
5 Disable these settings
When this check box is selected,
changed.
Settings in a tab where
addition, the settings in the tab will not be saved or exported when the [Save in Command File] or
[Export] command is executed.
6 Parameters
Displays the current settings.
7 Exit
Exits [Device Settings], and returns to the main window of the "Printer Setting Tool".
8 Apply
Applies the settings to the machine.
To save the specified settings in a command file, select [Save in Command File] from the drop-down list.
The saved command file can be used with the mass storage mode to apply the settings to a machine. (See
Mass Storage Mode on page 117.)
appears in the tab, and the settings can no longer be specified or
appears will not be applied to the machine even if [Apply] is clicked. In
.
6
97
Advertisement
Table of Contents
