Attaching The Keyboard Lcd Unit - Brother D800W User Manual

Setting Up the P-touch Labelling Machine

Attaching the Keyboard LCD Unit

a
Slide the cover on the bottom of the keyboard LCD unit to remove it, and then connect the keyboard LCD
unit cable.
Install the cover.
b
Connect the USB cable on the keyboard LCD unit to the socket on the side of the machine.
Note
• When you turn the machine on, the keyboard LCD unit is also turned on.
• The keyboard LCD unit can be installed on the machine by sliding it on the top cover.
When storing the keyboard LCD unit, turn it upside down and install it to the top cover to prevent it from
becoming dusty or dirty.
• You can place the excess cable in the cable holder.
1
1
4