Table of Contents
Advertisement
Changing Your P-touch Labelling
19
Machine Network Settings
Changing Your Machine's Network Settings
(IP Address, Subnet Mask and Gateway) Using Windows
Using the BRAdmin Light Utility
The BRAdmin Light utility is designed for the initial setup of Brother network connectable devices. It can also
search for Brother products in a TCP/IP environment, display the status, and configure basic network
settings, such as the IP address.
Installing BRAdmin Light
You must install BRAdmin Light to your computer. See Installing the Printer Driver and Software on page 62
for more information on the installation.
To download the latest version of BRAdmin Light, visit the Brother Solutions Center at support.brother.com.
Note
• For more advanced machine management, use the latest version of the Brother BRAdmin Professional
utility available as a download from the Brother Solutions Center at support.brother.com.
• If using firewall, anti-spyware, or antivirus software, temporarily disable them. When you are sure that you
can print, re-enable them.
• The node name appears in the current BRAdmin Light window. The default node name of the print server
in the machine is "BRWxxxxxxxxxxxx". ("xxxxxxxxxxxx" is based on your machine's MAC Address /
Ethernet Address.)
Setting the IP address, Subnet Mask and Gateway using BRAdmin Light
a
Start the BRAdmin Light utility.
For Windows Vista
Click [Start] - [All Programs] - [Brother] - [BRAdmin Light] - [BRAdmin Light].
®
For Windows
Click the [BRAdmin Light] icon on the [Apps] screen.
®
For Windows
From the Start button, select [All apps], and then click [BRAdmin Light] under [Brother].
b
BRAdmin Light will search for new devices automatically.
®
®
/ Windows
7 / Windows Server
®
8 / Windows
8.1 / Windows Server
10:
®
2008 / Windows Server
®
2012 / Windows Server
19
®
19
19
19
19
19
®
2008 R2:
®
2012 R2:
175
Advertisement
Table of Contents
