Table of Contents
Advertisement
Printing Using the Computer
Connecting the machine to your wireless access point/router using a computer
a
First, write down the SSID (network name) and password (network key) of your wireless access
point/router.
b
Connect the machine and computer with a USB cable.
c
Press and hold the
The
(Wi-Fi) indicator starts flashing in green once every three seconds.
d
Configure the Infrastructure Mode settings of the machine using the computer.
®
For Windows
Start the Printer Setting Tool on your computer, and click [Communication settings]. Select
[Infrastructure or Ad-hoc] or [Infrastructure and Wireless Direct] for [Selected Interface] in
[Communication settings] in the [General] tab, and select [Infrastructure] for [Communication
Mode] in [Wireless Settings] in the [Wireless LAN] tab.
For details, see Changing the P-touch Labelling Machine Settings on page 80.
For Mac
Start the Wireless Device Setup Wizard included in the Printer Driver Package, and then follow the
on-screen instructions. The Wireless Device Setup Wizard can be found in the [Utilities] folder.
e
Enter the SSID that you wrote down, or click [Search] and select the SSID from the displayed list.
f
Enter the password in the [Passphrase] field.
Note
The required information depends on the authentication method and encryption mode; enter only the
information relevant to your network environment.
g
To send the settings to the machine, click [Apply].
When the connection between the machine and your wireless access point/router is established, the
(Wi-Fi) indicator lights in green. Computers on the same network as the machine will have access
to the machine.
Note
To change any other network settings, use the Printer Setting Tool (see Changing the P-touch Labelling
Machine Settings on page 80).
(Wi-Fi) button on your machine for one second to turn the Wi-Fi function on.
4
65
Advertisement
Table of Contents
