Maintenance And Diagnostics - Siemens SITRANS LUT400 Operating Instructions Manual

2.16.6. Reset Running Totalizer
Select YES to reset running totalizer value to zero.
Options

3. Maintenance and Diagnostics

Default settings in the parameter tables are indicated with an asterisk (*) unless
Note:
explicitly stated.
3.1. Identification
To edit parameters with a string editor (
page 188.
3.1.1. TAG
Text that can be used in any way. A recommended use is as a unique label for
a field device in a plant. Limited to 32 alphanumeric characters (8 characters via
HART). Appears in top left corner of display in measurement mode (see The LCD
Display on page 34).
3.1.2. Long TAG
Text that can be used in any way. A recommended use is as a unique label for
a field device in a plant. Limited to 32 alphanumeric characters.
3.1.3. Descriptor
Text that can be used in any way. Limited to 32 ASCII characters (16 ASCII
characters via HART). No specific recommended use.
3.1.4. Message
Text that can be used in any way. Limited to 32 ASCII characters. No specific
recommended use.
3.1.5. Installation Date
Date the device was first commissioned (YYYY-MM-DD).
Manufacturer
Read only. The device manufacturer (e.g. Siemens).
Product Name
Read only. Identifies the product by name (e.g. SITRANS LUT400).
3.1.6. Product
Read only. Identifies the product by name and capability:
SITRANS LUT420 (Level)
SITRANS LUT430 (Pump and Flow)
SITRANS LUT440 (OCM)
3.1.7. Order No. (Order Number in PDM)
Read only. Order number for the current device configuration
(e.g. 7ML5050-0CA10-1DA0).
Page 200 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
* NO
YES
3.1. 1 . 3.1.5. Using the string editor:
to ), see on
A5E33329501