Siemens SITRANS LUT400 Operating Instructions Manual page 182

2.10.2. Process Value Log
2.10.2.1. Enable
Enables/disables Process Value (PV) Logging.
Options
2.10.2.2. Process Values Log Rate
Sets Process Value (PV) Logging rate in minutes.
Values
2.10.3. Alarm Log
2.10.3.1. Enable
Enables/disables Alarm Logging.
Options
2.10.4. Flow Log
Available only on LUT430 (Pump and Flow model), and LUT440 (OCM model).
Note: Default settings in the parameter tables are indicated with an asterisk (*)
unless explicitly stated.
2.10.4.1. Flow Log Mode
Menu number
OR
2.10.4.2. Flow Log Mode
Menu number
Sets flow log mode.
Options
a.
Option available only for LUT440.
2.10.4.3. Standard Flow Log Interval
Sets standard flow log interval in minutes, when 2.10.4.1.Flow Log Mode set
to a fixed or variable rate.
Values
Page 174 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
ENABLED
*
DISABLED
Range: 1 to 1440
Default: 1
ENABLED
*
DISABLED
2.10.4. 1 .
visible on LUT430 (Pump and Flow model).
2.10.4.2.
visible on LUT440 (OCM model).
* OFF
FIXED RATE
VARIABLE PERCENTAGE MAX FLOW / MIN
VARIABLE PERCENTAGE MAX FLOW
VARIABLE PERCENTAGE MAX HEAD
Range: 1 to 1440
Default: 1
a
a
a
A5E33329501