Totalizer Multiplier (2.14.5.); Maintenance And Diagnostics (3.); Identification (3.1.); Tag (3.1.1.) - Siemens HydroRanger 200 HMI Operating Instructions Manual

Parameter reference

8.7 Maintenance and Diagnostics (3.)

8.6.14.6

Totalizer multiplier (2.14.5.)

Use this feature if the LCD Total increments by too large (or too small) an amount.
Index
Options
Related
Enter the factor (powers of 10 only) by which actual volume is divided, prior to display on the
LCD. Use a value such that the eight-digit totalizer doesn't roll over between readings.
Example: For an LCD Total display in 1000s of volume units, choose option 1,000.
8.7 Maintenance and Diagnostics (3.)
8.7.1

Identification (3.1.)

8.7.1.1

Tag (3.1.1.)

Sets the text to label the device. Limited to 32 alphanumeric characters. Appears at the top
left corner of the display in Measurement mode. For more information, see The local display
(Page 51).
8.7.1.2

Descriptor (3.1.2.)

Sets the text that can be used in any way. Limited to 32 ASCII characters. No specific
recommended use.
8.7.1.3

Message (3.1.3.)

Sets the text that can be used in any way. Limited to 32 ASCII characters. No specific
recommended use.
252
Single-point model
Global
0.001
0.01
0.1
*1
10
100
1,000
10,000
100,000
1,000,000
10,000,000
Running totalizers high (2.14.2.) (Page 250)
•
Running totalizers low (2.14.3.) (Page 251)
•
Dual-point model
Transducer
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC