2.8.8.2.
Determines which relay (if any) will be activated when the Fail-safe Alarm
activates.
Options
2.8.8.3.
Read only. Use to view the current state of the Fail-safe Alarm.
Options
2.8.9. High Flowrate Alarm
Available only on LUT440 (OCM model).
Reported when the OCM flowrate is within a user-defined range (see
2.8.9.2.High Flowrate Value ON
2.8.9.1.
Enables/disables High Flowrate Alarm.
Options
2.8.9.2.
Sets the flowrate value (defined in 2.15.3.7.Flowrate Units) at which the
High Flowrate Alarm will activate.
Values
2.8.9.3.
Sets the material level (defined in 2.15.3.7.Flowrate Units) at which the High
Flowrate Alarm will de-activate.
Values
2.8.9.4.
Determines which relay (if any) will be activated when the High Flowrate
Alarm activates.
Options
Page 168
SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
Assigned Relay
Alarm State
Enable
*
High Flowrate Value ON
Range: 0 to 9999999
Default: 0
High Flowrate Value OFF
Range: 0 to 9999999
Default: 0
Assigned Relay
*
NO RELAY
RELAY 1
RELAY 2
RELAY 3
ACTIVE
INACTIVE
2.8.9.3.High Flowrate Value OFF
and
ENABLED
DISABLED
*
NO RELAY
RELAY 1
RELAY 2
RELAY 3
).
A5E33329501