Cisco ASA 5505 Configuration Manual page 266

Monitoring Interfaces
•
•
•
•
Graph/Table
The Monitoring > Interfaces > Interface Graphs > Graph/Table window shows a graph for the selected
statistics. The Graph window can show up to four graphs and tables at a time. By default, the graph or
table displays the real-time statistics. If you enable History Metrics (see the
section on page
Fields
•
•
•
Cisco ASA 5500 Series Configuration Guide using ASDM
8-38
Output Queue—Shows the number of packets in the output queue, the current and the
–
maximum, including the following statistics:
Hardware Output Queue—The number of packets in the hardware queue.
Software Output Queue—The number of packets in the software queue.
Drop Packet Queue—Shows the number of packets dropped.
–
Add—Adds the selected statistic type to the selected graph window.
Remove—Removes the selected statistic type from the selected graph window. This button name
changes to Delete if the item you are removing was added from another panel, and is not being
returned to the Available Graphs pane.
Show Graphs—Shows the graph window name to which you want to add a statistic type. If you have
a graph window already open, a new graph window is listed by default. If you want to add a statistic
type to an already open graph, choose the open graph window name. The statistics already included
on the graph are shown in the Selected Graphs pane, to which you can add additional types. Graph
windows are named for ASDM followed by the interface IP address and the name "Graph".
Subsequent graphs are named "Graph (2)" and so on.
Selected Graphs—Shows the statistic types you want to show in the selected graph window. You an
include up to four types.
– Show Graphs—Shows the graph window or updates the graph with additional statistic types if
added.
9-13), you can view statistics for past time periods.
View—Sets the time period for the graph or table. To view any time period other than real-time,
enable History Metrics (see the
updated according to the specification of the following options:
Real-time, data every 10 sec
–
Last 10 minutes, data every 10 sec
–
Last 60 minutes, data every 1 min
–
Last 12 hours, data every 12 min
–
Last 5 days, data every 2 hours
–
Export—Exports the graph in comma-separated value format. If there is more than one graph or
table on the Graph window, the Export Graph Data dialog box appears. Choose one or more of the
graphs and tables listed by checking the box next to the name.
Print—Prints the graph or table. If there is more than one graph or table on the Graph window, the
Print Graph dialog box appears. Choose the graph or table you want to print from the Graph/Table
Name list.
"Enabling History Metrics" section on page
Chapter 8 Configuring Interfaces
"Enabling History Metrics"
9-13). The data is
OL-20339-01