Cisco ASA 5505 Configuration Manual page 341

Chapter 16 Adding a WebtypeACL
Deleting Webtype ACLs and ACEs
To delete a webtype ACE, perform the following steps:
Choose Configuration > Remote Access VPN > Clientless SSL VPN Access > Advanced > Web
Step 1
ACLs.
Choose the ACL type to edit by clicking one of the following radio buttons:
Step 2
•
•
•
The main Access Rule Pane displays the available interfaces for the chosen rule type.
Select the ACE to delete.
Step 3
If you select a specific ACE, only that ACE is deleted. If you select an ACL, that ACL and all of the
ACEs under it are deleted.
Click Delete.
Step 4
The selected items are removed from the viewing pane.
Note
Click Apply to save the change to the configuration.
Step 5
Feature History for Webtype Access Lists
Table 16-2
Table 16-2 Feature History for Webtype Access Lists
Feature Name
Webtype access lists
OL-20339-01
IPv4 and IPv6— Shows ACLs that have both IPv4 and IPv6 addresses only.
IPv4 Only—Shows ACLs that have IPv4 type addresses only.
IPv6 Only—Shows access rules that have IPv6 type addresses only.
If you deleted an item in error and want to restore it to your configuration, click Reset before
you click Apply. The deleted item reappears in the viewing pane.
lists the release history for this feature.
Releases
7.0
Feature History for Webtype Access Lists
Feature Information
Webtype ACLs are access lists that are added to a
configuration that supports filtering for clientless SSL
VPN.
The feature was introduced.
Cisco ASA 5500 Series Configuration Guide using ASDM
16-5