Panasonic UF-9000 Service Manual page 141

4.10.3. Error Message Appears on the PC
Error Message
Network Print DLL Error.
Network Port is Busy.
Cannot print because an error is
found in the current printer
setting.
4.10.4. Error Message Appears on the Unit
Error Message
Cannot complete print job
Image memory overflow
Cannot complete
Confirm print condition
Cannot print
System error
4.10.5. System Error (CD Drive Related Error During Installation)
Problem
Cannot read the drive.
Ver. 1.0
• Check if the Panasonic Device is turned "On" and the 10Base-T/
100Base-TX cable is
• Printer Properties may be incorrectly configured. (i.e. Printer Port)
• The Panasonic Device may be processing someone's print job,
please wait and try again later.
• The Panafax facsimile unit is either Transmitting or Receiving an email.
• Verify and specify the paper size or orientation to coincide with the
application and the printer driver settings.
• The available Sort Memory in the Panasonic Device may not be
enough.
Either install an optional Sort Memory or change the
resolution to 300 dpi in the Printer Driver Properties dialog box.
• The print condition may not be matched for the system.
Change the printing condition in the Printer Driver Properties
dialog box.
i.e. Multi-sized printing.
• Change the resolution to 300 dpi in the Printer Driver properties
dialog box.
• Insert the CD into the drive and click "Retry".
141
Solutions
properly connected.
Solutions
Solutions
UF-9000
DP-180/190
JAN 2004