Panasonic UF-9000 Service Manual page 289

5 Specify the Firmware Code File by the
following methods.
Select an Archive File (Complete Set)
--> Step 5a1
You can select the Firmware Code Archive
File directly here.
The selected archive file will be extracted
into the local \Data folder automatically and
it is chosen as a set when the update of
multiple firmware code files are necessary.
Select a Parent File Folder (Complete Set)
--> Step 5b1
If the archive file is already extracted into
the local \Data folder, you can select the
Parent File Folder directly here.
It is chosen as a set when the update of
multiple firmware code files are necessary.
Select an Independent File
--> Step 5c1
If the archive file is already extracted into
the local \Data folder, you can select an
independent file here.
When updating multiple firmware files, you
must repeat the file selection operation.
5a1 Select an Archive File (Complete Set)
Select "Select an Archive File (Complete
Set)" and click [Browse...] button.
5a2 Select the Firmware Archive file and
click [Open].
ex. DP-2310_3010_PU_030227.exe
5a3 Extracting...
Local Firmware Update Tool (Parallel/USB Port)
Page 9