General; Supporting Os; Supporting Panasonic Fax/Copier Models - Panasonic UF-9000 Service Manual

1. General

The Local Firmware Update Tool (Parallel/USB) allows a Panasonic Fax/Copy machine to emulate a Flash
Memory Card Writer and create a Master Firmware Card, or to program the Firmware Code Memory of the Unit
directly. Using a PC, the firmware code is transferred to the Flash Memory Card or the Firmware Code Memory of
the Unit through the Parallel/USB Port on the Panasonic Fax/Copy machine. The installation and operation are
very similar to the Printer Interface.
1.1

Supporting OS

This application software operation has been confirmed under the following OS
• Windows 98 / Me
• Windows NT 4.0 (Parallel Port only)
• Windows 2000 / XP
1.2

Supporting Panasonic Fax/Copier Models

A list of the compatible Panasonic Fax/Copy machines are shown below:
Parallel Port Models
Programming a Flash Memory Card
• DP-130/135/150
• DP-1510/1810/2010
• DP-2000/2500/3000
• DP-3510/4510/6010, DP-3520/4520/6020
• DX-2000
• UF-585/595/590/790/885/895/890/990
Direct Firmware Update
• DP-1510/1810/2010
• DP-3510/4510/6010, DP-3520/4520/6020
• UF-E1
• UF-490/525/UF-590/790
USB Port Models
Programming a Flash Memory Card
• DP-180/190, UF-9000
• DP-2310/3010
Direct Firmware Update
• DP-180/190, UF-9000
• DP-2310 / 3010
Note:
1. Depending on the country, some Panasonic models may not be available.
2. Some UF-E1 models with the earlier versions of firmware will not support Parallel Firmware Update. Please
confirm whether your machine's firmware version supports Parallel Firmware Update with your service provider.
Local Firmware Update Tool (Parallel/USB Port)
Page 3