Panasonic UF-9000 Service Manual page 275

Specify the Firmware Code File using the
6
following methods.
Select an Archive File (Complete Set)
--> Step 6a1
You can select the Firmware Code Archive
File directly here.
The selected archive file will be extracted
into the local \Data folder automatically and
it is chosen as a set when the update of
multiple firmware code files are necessary.
Select a Parent File Folder (Complete Set)
--> Step 6b1
If the archive file is already extracted into
the local \Data folder, you can select the
Parent File Folder directly here.
It is chosen as a set when the update of
multiple firmware code files are necessary.
Select Independent File Folders
--> Step 6c1
If the archive file is already extracted into
the local \Data folder, you can select
independent file folders here.
Note:
1. Always update PNL, SC and SPC firmware as a set.
2. Files are chosen automatically in the automatic mode, so the screen of step 6 isn't indicated.
3. The FAX field is not used for DX-600/800/DP-3510/4510/6010.
The DX-600/800 uses only the SC field.
6a1 Select an Archive File (Complete Set)
Select "Select an Archive File (Complete
Set)" and click [Browse...] button.
6a2 Select the Firmware Archive file and
click [Open].
ex. DP-2310_3010_PU_030228.exe
Network Firmware Update Tool (LAN)
Page 9