Transmission Intermediate Case And Front Case (Location Of Knock And Plug); Tightening Torque; Specification - Suzuki Grand Vitara XL-7 Service Manual

7A2-42 MANUAL TRANSMISSION
4) Apply sealant to thread of interlock cam plug (1) and tighten it to

specification.

"A": Sealant 99000-31110

Tightening torque

Interlock cam plug (a): 25 N
5) Install oil seal to rear case so that end surface of oil seal be-
comes flush with that case. Apply grease to oil seal lip.
Grease: 99000-25010
Special tool
(A): 09913-75520
TRANSMISSION INTERMEDIATE CASE AND FRONT
CASE (LOCATION OF KNOCK AND PLUG)
D Press knock pin (1) and plug (2) (knocking those in until perfect
fit is achieved) into front ease as shown.
D Press knock pin (1) into intermediate case (2) as shown in the fig-
ure.
.
m (2.5 kg-m, 18.0 lb-ft)