6E3-38 ENGINE AND EMISSION CONTROL SYSTEM (RHZ ENGINE)
FUEL (RAIL) PRESSURE SENSOR
REMOVAL
1) Disconnect negative cable at battery.
2) Remove fuel filter assembly referring to Section 6C.
3) Disconnect connector from fuel pressure sensor (1).
4) Remove fuel pressure sensor from common rail (2).
INSPECTION
Measure resistance between sensor terminals (1) and (2).
If resistance is out of specification, replace fuel pressure sensor.
Fuel pressure sensor resistance: about 970 Ω at 20_C (68_F).
INSTALLATION
Reverse removal procedure for installation.