1
Model 3200LE Terminal
Installation
This section discusses the procedures for installing the 3200LE terminal. The
paragraphs below describe how to set up and connect the terminal in the
freestanding position.
Locating the Terminal
Position the terminal on a clean, horizontal surface that is free from vibration and
out of direct sunlight. Refer to "Windows-based Terminal Specifications" for
environmental specifications.
Connecting the Terminal
Make all connections to the back panel before connecting the terminal to power.
Figure 1-1 shows the back panel connectors.
Note
An optional wall-mount kit (P/N 920195-01) is available.
For more information call 1-800-800-WYSE (9973).
Note
A keyboard and AC power cord are supplied with U.S.
models only.