Ip Address Dialog Box - Wyse Winterm 3200LE Administrator's Manual

48
Advanced User Interface
Figure 6-3 IP Address Dialog Box (Address Supplied by DHCP)
Click on one of the two radio buttons to select a method for supplying IP addresses:
• If you select No, I will enter static IP information and click on Next, the
Specify an IP Address (Figure 6-4) will display, followed by the Optional
Information dialog box.
• If you keep the default Yes, use the IP information supplied by DHCP and
click on Next, the Optional Information dialog box will display, skipping the
Specify an IP Address dialog box.
Note
For first-time setup or a reset, in the event that the
terminal is not automatically assigned a DHCP address
while initializing, No, I will enter static IP information
is the default. Some or all of the IP information required
for this terminal could not be automatically obtained.
You may choose to use the automatically gathered
information by clicking on the Yes button. We
recommend that you enter IPs statically for best results.