7
Model 3350SE Terminal
Installation
This section discusses the procedures for installing the 3350SE enhanced modular
terminal. This terminal can be freestanding or, optionally, mounted on a wall; it can
instead be permanently mounted on a desktop, if desired. The following
paragraphs describe how to connect and set up the terminal in all three
configurations.
Locating the Terminal
Position the terminal on a clean, horizontal surface that is free from vibration and
out of direct sunlight. Refer to "Terminal Specifications" for environmental
specifications.
Connecting the Terminal
Make all connections to the back panel before connecting the terminal to power. A
shroud (described in "Shroud Attachment") can be installed after the cables are
connected and the terminal is mounted in place. The following figure shows the
terminal's back panel connectors.