Turning On The Terminal; 3200Le Terminal Power Management Button - Wyse Winterm 3200LE Administrator's Manual

3. Connect the mouse to the Mouse connector on the numeric keypad side of the
keyboard.
4. If you will be using a network connection, connect a 10Base-T or 100Base-T
network cable to the LAN connector.
5. Connect the power supply cable to the Power connector.
6. Plug the AC cord into the power supply, then into an AC outlet.
7. After the cables are connected, install the terminal in its planned location.

Turning On the Terminal

The terminal is powered-up and operating when the power supply is connected to
AC power. To toggle the display off or on, press and release the power
management button. If the button is continuously depressed for 3-5 seconds, the
unit will perform a hard boot. See Figure 1-2 for the location of the power
management button.
Figure 1-2 3200LE Terminal Power Management Button
The logo will appear on the screen, followed by:
• The Setup Wizard, if it is the first time that you have turned on your terminal.
• The Winterm Connection Manager dialog box, if the Setup Wizard has been
completed.
If desired, adjust the display's geometry and intensities to your preferences.
Adjustments to the display can be made at any time, whether or not the terminal is
connected to a server. See "Changing Terminal Properties" for more information.
Caution
Do not force a connector into its socket. If any undue
resistance is encountered, ensure that the connector is
oriented correctly to the socket.
5