Chapter 4: Programming The Vga Optica; Introduction; Programming Fundamentals - GE Optica Operator's Manual

Introduction

Programming
Fundamentals
Programming the VGA Optica
The Optica is programmed at the factory to display and output the
data required for many applications (see Table 3-2 on page 3-9). In
these cases, no further programming is required.
By programming the Optica, the following categories of data can be
customized for your application:
•
the front panel display (up to six parameters displayed numerically
and, on the VGA screen, a graphical display)
•
pressure input
•
analog outputs
•
serial output
•
built-in alarms
•
datalogging
•
miscellaneous functions
A built-in help system is included to answer questions you may have
while operating the unit. Select the HELP button and press ENTER to
access it.
Programming is accomplished using two main menu screens and
several secondary screens. Each screen displays data fields and
control buttons. Use the TAB key to step through the fields on each
screen—through both the data fields and the control buttons.
•
when a data field is selected, you can change the value of the field
as described on page 4-2.
•
when a control button is selected, pressing ENTER performs the
button's function.
•
The MORE control button accesses the next programming
menu.
•
The OK control button returns to the previous level.
•
The HELP button accesses the unit's built-in help system.
January 2006
4-1