Buzzer And Sounds; General Settings; User Equations - GE Optica Operator's Manual

Buzzer and Sounds

Setting
Sets the length (apparent loudness) of
Buzzer Timing
keyclick sounds.

General Settings

Setting
Dew Point Offset Enter the offset value for the Dew Point
parameter.
Dew Point Filter Enter the filter value for the Dew Point
parameter.
Temperature Offset Enter the offset value for the
Temperature parameter.
Temperature Filter Enter the filter value for the Temperature
parameter.
Pressure Offset Enter the offset value for the Pressure
parameter.
Pressure Filter Enter the filter value for the Pressure
parameter.
Lockout Set whether or not the Heat, Cool, and
PACER functions can be activated by the
softkeys on the front panel.

User Equations

Setting
Select Equation
Edit Label #1*
Edit Equation #1*
*The equation number shown is the one chosen in "Select Equation."
Programming the 4x40 Optica
Table 5-10: Buzzer and Sounds Option
Description
Table 5-11: General Setting Options
Description
See User Equations on page 4-4 for programming information.
Table 5-12: User Equation Options
Description
Choose an equation to enter or edit.
Enter or edit the label identifying
equation 1.
Enter or edit equation 1 using the
equation elements shown in Table 4-2
on page 4-5.
Available Options
Enter length of keyclick sound in msec
(150 msec maximum).
Available Options
Enter the value by which the Dew
Point parameter will be offset.
Enter the number of readings to be
averaged to create filtered Dew Point.
Enter the value by which the
Temperature parameter will be offset.
Enter the number of readings to be
averaged to create filtered Temp.
Enter the value by which the Pressure
parameter will be offset.
Enter the number of readings to be
averaged to create filtered Pressure.
OFF / ON
Available Options
1, 2, or 3
Alphanumeric
See Table 4-2 on page 4-5.
January 2006
5-11