Hicom 150 E Office Rel.1.0 Service Manual - 12 Cordless Multicell Integration CMI
Figure 12-3 Measurements (in mm) of the outdoor casing
12.3.2.1 Mounting base station on the mast outdoors
It is prohibited to mount the base station on a steel mast!
The mast's resistance to wind must be guaranteed!
Scope of delivery
Two metal tightening straps.
Procedure
Step
1.
Release and take off the sunshade.
2.
Loosen triangular head screws connecting outdoor casing to mounting plate and remove
outdoor casing. Open casing (four triangular head screws in cover).
3.
Loosen fastening screws of mast blocks.
4.
Adjust spacing of mast blocks to mast diameter required at height at which station is to be
mounted and fixed with fastening screws.
5.
Feed metal tightening straps through appropriate opening in mounting plate (see
6.
Hang fixing clips of outdoor casing onto triangular head screws of mounting plate. Tighten
triangular head screws.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_12.htm (6 of 45) [06/04/2000 13:05:55]
Action
Figure
12-4).