Call Override/Intrusion - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.1 Features for all traffic types

7.1.13 Call Override/Intrusion

Definition
Authorised users and the current intercept position (day or night) can use a code or key to override a
call in progress at an internal extension.
The participating extensions are notified of the call override/intrusion by an alerting tone and a screen
display.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
Subject
Voice channel signalling
security
Group call/hunt group
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step
1. Configure call override/intrusion:
*9531994
2. 14-13 => Extension Data Menu - Intrusion Ability
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step
1. Configure call override/intrusion:
Options
2. Set up station
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_71.htm (15 of 18) [06/04/2000 13:09:16]
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
You cannot override a call if the called extension or its internal call
partner is entered as a data extension (voice channel signalling security),
or if the called party is dialling a number.
You cannot override if all extensions are busy when placing a call to a
group or a hunt group.
Action
Action
OfficePoint
x x
- -
Dependency/Limitation
OfficeOne
x
-