Connecting Hicom Gcm - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 6 Expanding the system
CSF mode
(
single sheet
feed)
Administration
Section 8.1 describes how to administer the P 500 dot-matrix printer.
Output formats
For information about the output formats (compressed, uncompressed) for call detail recording,
central, see Section

6.1.4 Connecting Hicom GCM

Introduction
Hicom GCM supports call detail recording and evaluation (code book included) for up to 150 stations
and 15,000 call detail records.
Refer to the Hicom GCM A31004-S4500-X100-*-92 Service Manual for information on how to
configure and start up the call charge computer/manager.
Administration
Section 8.2 describes how to administer Hicom GCM.
Connection
Figure 6-6 Connecting the call charge computer/managers (Hicom GCM)
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_6m.htm (12 of 14) [06/04/2000 13:05:06]
2-8
The default settings appear in bold.
7.12.8.
On Off