Wall Mounting - Siemens optiPoint key module Installation Instructions Manual

Active Speaker

Wall Mounting

1. Remove the rear rubber foot from the base of the loudspeaker.
2. Insert the supplied plastic insert into the opening.
3. The loudspeaker can be installed in an upright position on a mounting bracket
Note: plastic insert and screw are not suitable for installing the unit directly
on the wall (hanging position)!
Technical data
Power supply:
Power:
Frequency range:
Input sensitivity:
Impedance:
Connection cable: 2 m; with 4/4 Miniwestern plug
Dimensions:
Weight:
44
(not included), for example, by means of the plastic insert and the supplied
screw.
Only via plug-in power unit supplied:
L30460-X1325-X; for GB:L30460-X1325-X1
230 V AC +6%/–10% / 22 V AC; 50 Hz;
connecting cable 2 m; elbow plug included
7 Watt
100 Hz - 16 kHz
250 mV (at full output)
10 k
160 x 98 x 95 (H x W x D, mm)
approx. 500 g
Ω