Displaying Names / Numbers - Siemens Hicom 150 E Office Service Manual

Hicom 150 E Office Rel.1.0 Service Manual - 7.11 Networking
Subject
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
This feature does not have to be explicitly configured
Performing Feature Check
Check the feature for error-free functioning as follows:
Step
1. Call a busy or idle extension in networked PABX.
2. Initiate callback and hang up.
3. When the extension goes into the idle state or when the handset is lifted, the callback is
performed.

7.11.11 Displaying Names / Numbers

Definition
Apart from the extension number, Hicom 150 E Office transmits the name of the calling extension
over CorNet N connections. Likewise, a name - if one exists - is displayed instead of the extension
number for incoming calls.
Both uppercase and lowercase are supported. You can set whether the name or the extension number
is displayed for callers.
Model-Specific Data
Subject
Feature available in
HW requirements
SW requirements
Dependencies/Limitations
Subject
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_711.htm (11 of 17) [06/04/2000 13:11:34]
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0
OfficePro OfficeCom
x
-
As of Rel. 1.0 As of Rel. 1.0
OfficePoint OfficeOne
x _
- -
_
Action
OfficePoint OfficeOne
x _
- -
_
Dependency/Limitation
_
-
_
_
-
_