Step 3: Install The Services Gateway - Juniper SRX5600 Getting Started Manual

SRX5600 Services Gateway Getting Started Guide

Step 3: Install the Services Gateway

8
Figure 3: Mounting Hardware for an Open-Frame Rack
Proceed to "Step 3: Install the Services Gateway" on page
Because of the services gateway's size and weight, you must remove all components,
as shown in Figure 4 on page 9
gateway. We also recommend using a mechanical lift to install the services gateway.
Remove Components on page 9
Install the Services Gateway Using a Lift on page 10
Install the Services Gateway Without a Mechanical Lift on page 12
Reinstall Components on page 12
and Figure 5 on page 9, before you install the services
Copyright © 2013, Juniper Networks, Inc.
8.