VPA 7748131 English 09-2007
16783
51266
51267
Trim Controls
Trimming (raising and lowering the drive) can be per-
formed by using:
•
A separate control panel (shown at left) on the
instrument panel.
•
A control button 2 on the single control lever.
•
The control buttons 4 & 5 on the port control
lever in a twin installation.
The current trim position is indicated on a trim gauge
located on the instrument panel, in the tachometer
LCD display, or elsewhere on the dashboard.
Operating Trim Controls
Control Panel
The control panel has two standard buttons for tilt con-
trol:
•
The top button moves the drive trim out while
raising the boat's bow.
•
The lower button moves the drive trim in while
lowering the boat's bow.
Remote Control Lever
The control button on the control lever has two func-
tions:
•
Pressing the top half of the button moves the
drive trim out while raising the boat's bow.
•
Pressing the bottom half of the button moves the
drive trim in while lowering the boat's bow.
Controls
31