Pta Calibration - Volvo 5.0OSiE-J Operator's Manual

EC
EVC User's Guide

PTA Calibration

The PTA (power trim assistant) adjusts trim angle automatically according to engine speed (RPM). It is possible
to set five trim angles at five different engine speeds (including idle speed).
For twin installations, the PTA CALIBRATION can be performed on either display (engine side).
These instructions are a continuation of the section entitled Entering the Settings Menu on page 154.
Use the BACK BUTTON 5 at any time to return to the previous menu.
5. Turn the SELECTION WHEEL 10 to select PTA
CALIBRATION and enter by pushing the SELEC-
TION WHEEL.
6. Turn the SELECTION WHEEL to select PTA
CALIBRATION POSITION (1–5) and enter the
selected POSITION by pushing the SELECTION
WHEEL.
7. Set RPM for the selected PTA CALIBRATION
POSITION by turning SELECTION WHEEL and
confirm by pushing SELECTION WHEEL.
These settings are for illustrative purposes only; they are not recommended settings for an actual system!
Proper settings are boat specific. Check with your dealer for correct settings.
VPA 7748131 English 09-2007
RPM cannot be set for PTA CALIBRATION POSI-
TION 1, idling speed.
8. Set TRIM ANGLE for selected PTA CALIBRA-
TION POSITION by turning SELECTION WHEEL
and confirm by pushing SELECTION WHEEL.
The calibration procedure continues to the next
POS (step) after confirmation.
50851
Appendix
163