Trip Page (Button 3); Graph Page (Button 4) - Volvo 5.0OSiE-J Operator's Manual

EC
EVC User's Guide
Single engine installations:
Twin engine installations:
Single engine installations:
Twin engine installations:
VPA 7748131 English 09-2007
50880
50881
50882
50883

Trip Page (Button 3)

Enter the TRIP page by pushing button 3. This display
mode shows:
•
TRIP FUEL – Total amount of fuel used since
last zeroing (l, Gal).
•
TRIP RATE – Average fuel consumption since
last zeroing (l/h, Gal/h).
•
TRIP HOURS – Operation time since last zero-
ing (h).
•
ENGINE HOURS – Total operating time (h). This
can not be zeroed.
When the display is set for a twin engine installa-
tion, the information displayed for each engine
will be the sum of the values from both engines
(except operating time). Operation times for twin
engines are shown separately.
If you want to zero the trip values, keep button 3 de-
pressed for 1 second. The unit beeps and the values
are zeroed.

Graph Page (Button 4)

Enter the GRAPH page by pushing button 4. In this
display mode, operating information is displayed in the
form of a histograph. Press button 4 repeatedly to al-
ternate between different operating parameters.
If an item of operating information is not available, that
window cannot be chosen.
If contact with the relevant information is lost during
display, the curve will no longer be drawn, but the line
will continue to scroll across the window.
Data for the port engine or single engine information
is drawn with a black line.
Data for the starboard engine information is drawn
with a gray line.
The maximum time interval can be set to one of the
following values in the configuration menu: 2 min, 10
min, 30 min, 1 h, 2 h, 4 h, 8 h. The scale on the Y axis
is automatically adjusted for best indication.
For additional information, please see Calibrations
and Settings on page 154.
Appendix
139