Engine; Display (Interval) - Volvo 5.0OSiE-J Operator's Manual

Appendix
166
50869b
51275b
50869c

Engine

This setting is usually performed by the boat
builder.
Set which engines are connected to the display.
Choices relevant to gasoline engine installations are
SINGLE, PORT, STARBOARD, or TWIN (two engines
to one display).
1. Enter the (hidden) CONFIGURATION MENU by
pressing button 5 for 5 seconds (or more). When
in the CONFIGURATION MENU help icons
above the buttons will indicate their function.
2. Select SETTINGS and enter.
3. Select ENGINE and enter.
4. Select the relevant option, SINGLE, PORT,
STARBOARD, or TWIN (two engines to one dis-
play) and confirm by pushing BACK.

Display (Interval)

Adjust the interval for operating information displayed
with a pointer/graph or turn on/off the speedometer in
display mode MULTI (only if a speed sensor is in-
stalled).
•
ENGINE RPM – Adjust interval between 2500
RPM and 9000 RPM in stages of 500 RPM
•
SPEED – Speedometer shown in display mode
MULTI, ON/OFF.
•
SPEED – Adjust interval between 10 KNOT and
100 KNOT in stages of 10 (in the appropriate
speed interval).
•
GRAPH INTERVAL – Adjust interval 2 MIN,
10 MIN, 30 MIN, 60 MIN, 2 H, 4 H or 8 H.
1. Enter the (hidden) CONFIGURATION MENU by
pressing button 5 for 5 seconds (or more). When
in the CONFIGURATION MENU help icons
above the buttons will indicates their function.
2. Select SETTINGS and enter.
3. Select DISPLAY and enter.
4. Select one of the options ENGINE RPM, SPEED,
SPEED, or GRAPH INTERVAL and enter.
5. Adjust according to your preferences and confirm
by pressing BACK.
EC
EVC User's Guide
VPA 7748131 English 09-2007