Table of Contents
Advertisement
talkback features
The
system provides facilities for assigning an external signal
TALKBACK
(usually the console operator's microphone) to any of the console's out-
puts.Other signals can be routed through the
tone oscillator or the built in
talkback level
This control sets the level that appears at any of the outputs with
their respective
TALK TO
at the
output XLR connector on the rear panel.
TALKBACK
pink noise
The
in-connector is disabled and
TALKBACK
the
system.
TALKBACK
talkback on
—TALK ON
This switch must be activated for the
There are two-ways to activate it:
1
Momentary - Depressing the button for more-than 1/2 of a second will
cause it to act as a momentary switch.When the button is released, the
section will be shut-off.
TALKBACK
2
Toggle - A quick tap on the button (less-than 1/2 second) will cause the
switch to electronically change its state from on-to-off or from off-to-on.
TALKBACK
generator.
PINK NOISE
switches engaged. It also governs the audio level
PINK NOISE
system to operate.
TALKBACK
master module
system include the
is sent though
5
p. 75
Hide quick links:
Advertisement
Table of Contents
