Fader Reverse; Reversing Aux / Group And Aux / Main; Aux 1–6 Output Level; Talk To—Aux 1–6 - Crest Audio X-Four Owner's Manual

fader reverse

The / feature is used to swap the functions of the
AUX GRP
trols and the
GROUP MASTER
controls.
MAIN
Swapped controls include: the
switch, and the
MASTER LEVEL
and a fader on the
GROUP MASTER

reversing aux / group and aux / main

AUX—red LED off
The 1–6 and
AUX GROUP
, and
SOLO MUTE TALK TO
figuration.
GRP—red LED on
LED
and functions are reversed.
AUX GROUP
The 1– 6 output levels are controlled by the output faders.
AUX
The
AUX SAFE PREVIEW LED
the output signal.
GROUP
The 1–4 and
GROUP
rotary 1–6
AUX MASTER
The ,
GROUP SOLO GROUP MUTE
output signal.
AUX
aux 1–6 output level
The
AUX MASTER
corresponding output connectors on the rear-panel.
AUX
talk to—aux 1–6
Adds the
TALKBACK
level of the
TALKBACK
section.
TER
after-fader listen—
Pressing this switch will include the
exclude (when not illuminated).
see—master module
controls and the
AUX MASTER
switch, the
TALK TO
control (via rotary control on the
).
1–4 and /
MASTER LEFT RIGHT MAIN
switches operate as normal in their default con-
, , and
AUX SOLO AUX TALK TO
/ output levels are controlled by the
LEFT RIGHT MAIN
level controls.
and
GROUP TALK TO
output level controls set the levels that appear at the
system output to the associated
signal is set by the
TALKBACK
AFL
AUX
con-
AUX MASTER
and /
LEFT RIGHT
switch, the
SOLO MUTE
AUX MASTER
level controls,
switches apply to
switches apply to the
output.The
AUX
level control in the -
MAS
(when illuminated) or
group module
3
p. 47