Level Meter Features; Level Meter; Peak Indicator—Pk; Signal Level Led ’S - Crest Audio X-Four Owner's Manual

level meter features

level meter

LED LED LED LED
for visually monitoring signal levels.This is essential for setting up and main-
taining proper gain structure.
peak indicator—PK
The input signal is monitored at several points throughout the chan-
LED
nel.These points are the mic preamp, the EQ stage and the fader stage.
Overloads at any of these stages will cause the red peak- LED to light.
Then the channel gain should reduced.
signal level LED 's
These three LED 's light up at +8—yellow, 0—green, and -6 dB—
LED
green. This level range -6 to +8 is the optimum operating range.
Compressed or relatively constant signals should remain close to 0.
signal present indicator—SIG
This green-LED varies in brightness in response to signal levels
LED
between -40 dB and -6 dB.
Each input includes a five-segment LED meter
LED
mono input module
Occasional flashing of the
peak LED is acceptable,
but frequent flashes indi-
cate that channel levels
must be lowered.
If the channel peak
LED is illuminated,
first try lowering
the input gain control.
Only when this method is
unsuccessful should the pad
switch be engaged.
1
®
+
p. 19