Crest Audio X-Four Owner's Manual page 37

bus assignment features
balance on—groups—
The left and right signals are summed as mono to make up the group
assignment signals.
The left and right signals are assigned in stereo to the groups in
odd/even pairs.
GROUP
nal and assignment switches 2 and 4 carry the right input-signal.
GROUP
The proportion of left vs. right can be adjusted by the
group 1–4 assignment
The input channel's post-fader signal is assigned to the correspond-
ing bus(es).
GROUP
see—balance on—groups
input fader
The input fader is the primary level control for signals being sent to any of
the console's mix buses.The only signals not affected are
ed to be pre-fader. The fader offers greater than 80db of attenuation and
up to 10db of boost. Normal operation is between -10 and 0.
pre-fader listen—
PFL
Pressing this switch will include (illuminated) or exclude (not-illumi-
nated) the input channel.
see—master module
BAL ON
assignment switches 1 and 3 carry the left input-sig-
stereo input module
control.
BALANCE
sends select-
AUX
2
p. 37