Crest Audio X-Four Owner's Manual page 71

right master features
signal/peak
LED—SIG/PEAK
This dual-color LED responds to the right pre-fader stereo signal. It
LED
illuminates green with varying brightness in proportion to the audio signal.
When the signal approaches clipping, either pre- or post-fader, the LED
illuminates red.
right
—TALK TO
The system output is added to the left and right
TALKBACK
outputs.The level of the
trol in the section.
MASTER
left/center/right
—LCR TO MASTER
This feature is useful for monitoring the console when creating an LCR
mix. Local monitoring is usually done with one or two speakers.The LCR
to outputs feature combines the center (or mono) signal with the left and
right signals, creating a phantom center channel.This feature affects the
section, the
OUT MONITOR OUT
headphone feed.
Center (mono) channel is not included in the
The center (or mono) channel is combined with left and right
outputs.This makes it possible to hear the center channel without a
ITOR
designated speaker.
right master fader
This fader governs the main right output level.
after-fader listen—
When this switch is depressed, the right post-fader signal is sent to
the console solo system.
signal is set by the
TALKBACK
section, the
HEARING ASSIST
AFL
MASTER
level con-
TALKBACK
ALT
output and the
paths.
MONITOR
-
MON
master module
5
p. 71